Use And Care Manual

Page 15
MAINTENANCE
1. Verify that the power cord is disconnected
from the outlet. (fig. 1)
Fig. 1
2. Disconnect the hose from the vacuum.
(fig. 2)
Fig. 2
3. Undo the latches and remove the power
head from the collection tank. (fig.3)
Fig. 3
5. Clear all dirt or debris from the collection
tank and hose. (fig. 4)
Fig. 4
6. Clean the foam wet filter by washing it with
water and mild soap. (fig. 5)
Fig. 5
7. Check the hose, attachments, and power
cord to verify that they have not been
damaged.
NOTICE!
The filters included are made of high
quality materials designed to stop small dust
particles. A dry cartridge filter is necessary to
pick up dust. If the cartridge filter is wet, it will
clog quickly and be difficult to clean. Handle the
filter carefully when removing it for cleaning or
replacing. Check the filters for tears or small
holes. A small hole can let dust pass through
and out of the filter. Do not use a filter with
holes or tears in it; replace it immediately.
WARNING:
ALWAYS DISCONNECT
THE PLUG FROM THE POWER OUTLET
BEFORE REMOVING THE POWER HEAD
FROM COLLECTION TANK.