Use And Care Manual

Page 8
7. Slide the rear wheels into the slots making
sure to match the wheel letter to the
corresponding letter on the wheel slot and
use screws to secure them. Do not over
tighten the screws. (fig. 7 & 8)
Fig. 7 Fig. 8
A
A
B
B
8. Your vacuum comes ready for dry vacuum
cleaning. For filter installation instructions,
please refer to page 16. (fig. 9 & 10)
Fig. 9 Fig. 10
9. For wet vacuum cleaning, install the supplied
foam wet filter. (fig. 11) See page 17 for filter
installation.
Fig. 11
10. Optional: For improved filtration when dry
vacuuming, install a dust collection bag.
To install the collection bag, firmly slide
cardboard collar opening onto the vacuum
port deflector, then position the bag so that
it is distributed around the inside of the
tank. (Dust collection bag sold separately.)
(fig. 12)
Fig. 12
DO NOT USE A DUST COLLECTION
BAG FOR LIQUID VACUUMING. WHEN
WET VACUUMING, ONLY USE THE
APPROPRIATE FOAM WET FILTER.
11. Place the power head back on the collection
tank, aligning the top section with the
latches, and snap into place. (fig. 13)
Fig. 13
GENERAL ASSEMBLY INSTRUCTIONS