Use And Care Manual

Page 9
GENERAL ASSEMBLY INSTRUCTIONS
8. Fit collection bag f lange onto the inlet port,
taking care not to damage the bag. (fig. 11)
Fig. 11
9. For wet vacuum cleaning, remove the pre-
filter, HEPA filter and collection bag, and
install the supplied foam filter. (fig. 12) See
page 17 for filter installation instructions.
Fig. 12
10. Place the power head back on the tank,
aligning the top section with the latches,
and snap into place. (fig. 13)
Fig. 13
11. Insert the locking end of the hose into the
vacuum port and turn to lock into place. (fig.
14)
Fig. 14
12. Choose the desired accessories and push
onto the suction tube. (fig. 15)
Fig. 15
WARNING:
IF FILTERS ARE
CONTAMINATED OR HAVE BEEN USED,
THEY MUST BE DISPOSED OF PROPERLY,
PRIOR TO PERFORMING WET VACUUMING
OPERATIONS.
LIGHTED PLUG
This vacuum comes standard with a lighted
plug that when plugged in lights up showing
user that wall receptacle is working and that
vacuum has power.
POLARIZED PLUG
To reduce the risk of electrical shock, this
appliance has a polarized plug (one blade wider
than the other). This plug will fit in a polarized
outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install the
proper outlet. Do not change the plug in any
way. Double insulation
eliminates the need
for the three wire grounded power cord and
grounded power supply system.