Use And Care Manual

Page 11
DRY VACUUM OPERATION
5. Place the power head back on the collection
tank, and secure it in place using the
latches. (fig. 7)
Fig. 7
OPERATING INSTRUCTIONS: DRY
VACUUMING
1. Insert the locking end of the hose into the
vacuum port and lock in place. Push the
required attachment onto the free end of
the hose or extension. (fig. 8)
Fig. 8
2. Plug the power cord into the outlet. (fig. 9)
Fig. 9
3. Turn the motor on by f lipping the switch to
the ‘I’ ON position. (fig. 10)
Fig. 10
4. Once you have completed vacuuming, flip
the switch to the ‘O’ OFF position and
unplug the power cord from the outlet.
O = OFF I = ON
WARNING:
IF FILTERS ARE
CONTAMINATED OR HAVE BEEN USED,
THEY MUST BE DISPOSED OF PROPERLY,
PRIOR TO PERFORMING WET VACUUMING
OPERATIONS.
DO NOT USE THE HEPA FILTER FOR
LIQUID VACUUMING.
Hazardous materials must be disposed of
properly. NEVER throw contaminated debris
in your usual trash receptacle. Place debris
in a OSHA approved poly bag or container
marked with HAZARDOUS MATERIAL warning
and dispose in accordance with your local
Hazardous Waste Regulations.