Use And Care Manual

Page 16
BLOWER OPERATION
This Wet/Dry Vac has blowing capabilities. To
use the blower feature follow the instructions
listed.
WARNING:
ALWAYS WEAR SAFETY
GOGGLES COMPLYING WITH ANSI Z87.1
(or in Canada, CSAZ94.3) BEFORE USING
BLOWER.
CAUTION:
KEEP BYSTANDERS
CLEAR FROM BLOWING DEBRIS.
WARNING:
WEAR A DUST MASK IF
BLOWING CREATES DUST THAT MIGHT BE
INHALED.
1. Verify that the switch is in the '0' (OFF)
position. (fig. 1)
Fig. 1
2. Make sure the collection tank is empty
before using as a blower.
3. Lift the button on the blower filter door to the
unlocked position and flip the blower filter
door open. (fig. 2)
Fig. 2
4. Remove hose from the vacuum port and
insert the locking end of the hose into the
blowing port on the power head and lock
into position. (fig. 3)
Fig. 3
5. Fit the desired extension wand and/or
nozzle to the free end of the vacuum hose.
(fig. 4)
Fig. 4
6. Before turning ON the vac, firmly hold loose
end of the hose. Turn the motor on by
lipping the switch to the ‘I’ ON position (fig.
5) or set the switch to the remote control
setting and use the remote control.
Fig. 5