Users Manual Part 2
18
Product Install Guide – M4xx Series
03/11/22 | V1.9.9
Privacy ButtonPanic/Alert Button
Buzzer
Driver ID
with RFID
Driver feedback
LEDs
The HMI or Lightbar features the following:
• Driver Identication by RFID tags
• Panic/Alert button
• Privacy button
• Driver behaviour bar graph with 18LED
• Buzzer, for login reminder and driver behaviour
alerts
The HMI MUST be clearly visible from the driver’s seat, to prevent the driver from taking the
eyes o the road.
Installing the HMI on the central console may be preferable as it generally allows it to be
positioned higher. If this is not possible the HMI can be installed on the dash between the
steering wheel and the door.
Refer to the MICHELIN Connected Fleet vehicle guides for recommended HMI positions for the
vehicle you are working on.
FEATURES
INSTALLATION
POSITION
The HMI is installed by pre-applied adhesive to the back of the
lightbar. The area must be clean. Use the included alcohol wipe
to clean the area before attaching the HMI.
NOTE: If possible avoid making a visible notch in panels to route
the HMI cable. If needed make sure that the notch is small and
neatly done with proper tools. NEVER make a hole in the middle
of a panel.
Alchohol wipe included
RHD - Skoda Superb 3 RHD - VW Crafter 2 LHD - Ford Transit 2T
LHD - M-B Vito W447 LHD - Renault Trac 3 LHD - Iveco Eurocargo
13. HMI (Optional)
HMI POSITION EXAMPLES: