Users Manual Part 2

19
Product Install Guide – M4xx Series
03/11/22 | V1.9.9
LOOMING
Any excess cabling should be loomed up tidily in a gure eight, and tied together with cable
ties and tape. Excess cabling should not be looped. All MICHELIN Connected Fleet cables
should be gathered up and loomed up into one loom.
Best Practice Bad Practice
ROUTING
To minimise electrical interference
the MICHELIN Connected Fleet wiring
should be run along the existing
vehicle wiring or the metal structure
of the vehicle.
The cables should be fastened with
cable ties approximately every
4inches, 10 cm.
MICHELIN Connected Fleet wiring and equipment MUST NOT obstruct or interfere with any of
the following:
Airbags Day to day operation Vehicle servicing Other equipment
Red - MICHELIN Connected Fleet wiring Green - Original wiring
Blue - Cable ties
14. Cable routing