Installation Guide

Installation Guide
SLIDING PATIO SCREEN DOOR
1. Insert screen door
into top channel of
the Master Piece
main door. T hen fit
wheels to ride on top
of bottom Master
Piece R ail. Note: For
doors that fit snug,
gently flex sides of
door frame while
using your fingers or
flat tool to position
wheels onto rail.
Have Questions? Call our Customer Service Hotline
1-800-768-7325 Or Visit our website at
www.ScreenTight.com
Striker and 2 screws included
T ools N eeded:
Tape Measure
Pencil
#2 Phillips Screwdriver
Flat Tool or Putty K nife
1/16" Drill Bit
Drill
2. Slide door to check
for proper operation.
If door doesn't glide
smoothly, recheck
wheels to make sure
they are riding on top
of bottom rail.
3. For screen door to
latch, install striker,
which is included.
Measure and mark
the height of the
screen door latch.
Transfer the latch
height to main door
frame. Position
striker on main door
frame at desired
height, then mark for
two screw holes.
Drill1/16" pilot hole
in main door frame.
Fasten striker to main frame using the included
screws. Note: Striker height can be adjusted up
and down for handle to latch.