Installation Manual

ManualsBrandsMastervolt Manuals24V AC to DC Battery Chargers24V-40A-3 ChargeMaster Plus Battery Charger with CZone Integration

ChargeMaster Plus 12/75-3, 12/100-3, 24/40-3, 24/60-3 – User and Installation Manual

13

WARNING!

All electrical systems (AC and

DC) must be disconnected from

any power source during the

entire installation!

CAUTION!

Too-thin cables and/or loose

connections can cause

dangerous overheating of the

cables and/or terminals.

Therefore, tighten all connections

well, in order to limit transition

resistance as far as possible. Use

cables of the correct size.

CAUTION!

Short circuiting or reversing

polarity may lead to serious

damage to the batteries, the

ChargeMaster Plus, the cabling

and/or the terminal connections.

Fuses between the batteries and

the ChargeMaster Plus cannot

prevent damage caused by

reversed polarity. The damage as

a result of reverse polarity is

detectable by the service depart-

ment and is not covered by the

warranty.

3.8 Installation step-by-step

1

2

3

Fix the enclosure to the wall by

fastening two screws at the lower side

of the ChargeMaster Plus as well.

4

Open the connection

compartment by loosening the two

screws.