Installation Manual

ChargeMaster Plus 12/75-3, 12/100-3, 24/40-3, 24/60-3 – User and Installation Manual
29
5.6 Maintenance
No specific maintenance to the ChargeMaster
Plus is required. Examine your electrical
installation on a regular basis, at least once a
year. Defects such as loose connections,
damaged wiring etc. must be corrected
immediately. If necessary, use a soft clean cloth
to clean enclosure of the ChargeMaster Plus. Do
not use any liquids or corrosive substances, such
as solvents, alcohol, petrol or abrasive
components.
5.7 Storage
If it is necessary to put the ChargeMaster Plus
out of operation, execute the following steps:
1 Turn AC power off.
2 Switch off the ChargeMaster Plus (see
section 5.2).
3 Remove the DC fuse(s) and disconnect the
batteries.
4 Switch the RCD/Breaker of the AC input to
the OFF position and, if required, disconnect
the AC mains.
5 Open the connection compartment of the
ChargeMaster Plus.
6 Check with a suitable voltage meter whether
the inputs and the outputs of the
ChargeMaster Plus are voltage free.
7 Disconnect all the wiring.
Now the ChargeMaster Plus can be demounted
in a safe way. When not installed, store the
ChargeMaster Plus in a dry and dust free
environment. To return to normal operation, after
re-installation, switch on the AC.