Installation Manual

32
ChargeMaster Plus 12/75-3, 12/100-3, 24/40-3, 24/60-3 – User and Installation Manual
7 TECHNICAL DATA
7.1 Specifications 12V models
Model
12/75-3
12/100-3
Product code
44310755
44311005
Nominal input voltage
120/240V
120/240V
Nominal input frequency
50/60Hz
50/60Hz
Full load consumption
1300VA
1700VA
Max. AC input current (@ 240VAC)
5.6A
7.5A
Max. AC input current (@ 120VAC)
11.8A
14.9A
Nominal output voltage
14.25V
14.25V
Total charge current*
75A at 14.25V
100A at 14.25V
Number of battery outlets
3
3
Max. current DC 3 IN/OUT
75A/40A
100A/40A
Max. input voltage DC 3 IN/OUT
16V
16V
Charge characteristic*
IUoUo, automatic, 3-step+
Charge voltage Bulk*
14.4V
14.4V
Charge voltage Absorption*
14.25V
14.25V
Charge voltage Float*;
13.25V
13.25V
Max. absorption and max. bulk timer*
8 hours (start max. bulk timer at 13.25V)
Minimum absorption time*
15 min.
15 min.
Maximum ripple voltage on DC
120mV pp
120mV pp
Battery type settings*
Flooded (default), GEL, AGM, MLI (Li-ion), Constant voltage
(13,25 V)
Dimensions (mm)
383×250×126
383×250×126
Dimensions (inch)
15.0×9.8×5.0
15.0×9.8×5.0
Weight
5,9 kg (13 lbs)
5,9 kg (13 lbs)
Recommended battery capacity
140-800Ah
200-1000Ah
Power factor regulations
≥ 0,98
≥ 0,98
Temperature compensation
Battery temperature sensor and cable included.
Voltage compensation
Yes, by means of automatic compensation or MasterShunt
DC consumption
<5mA
<5mA
Temperature range
–25°C (–13°F) to 80°C (176°F)
Derating 1%/°C (0,5%/°F) from 40°C (104°F) to 60°C (140°F)
Derating 8%/°C (4,4%/°F) from 60°C (140°F) to 70°C (158°F)
Communication available, 0% output power from 70°C (158°F)
to 80°C (176°F)
Cooling
Vario fan and natural cooling to ensure optimized cooling
Sound level
<52dBA / 1m
Protection degree
IP 23
IP 23
CZone connectivity
Yes
Yes
MasterBus connectivity
Yes
Yes
Powering capabilities for MasterBus
Yes, when the charger is switched on and AC is available, it
can power up to three non-powering devices.
Ignition protected
Yes, conforming to SAE J1171/ISO 8846
* Adjustable, see chapter 4 for settings. Specifications are subject to change without prior notice.