Product Specifications

Specifications
General specifications
Output voltage (± 5 %) 230 V - 50 Hz (± 0.01 Hz)
Output waveform true sine
Nominal battery voltage 24 V
Recommended battery capacity > 350 Ah
Continuous power at 40 °C / 104 °F, cos phi 1 4000 W
Peak load 7000 W
AC connection internal
Galvanic isolation yes
Efficiency > 92 %
Parallel configuration yes, up to 10 units
3-Phase configuration yes, up to 3x3
Display/read-out LED display
Dimensions, hxwxd 472 x 318 x 178 mm
18.6 x 12.5 x 7.0 inch
Weight 15 kg
33.1 lb
Compliance CE, ABYC, E-mark
Technical specifications
Technology HF switch mode
Low battery voltage, switches off at 19-22 V, dynamic window V
Low battery voltage, switches on at 24 V, ± 0.5 V
High battery voltage, switches off at 32 V, ± 0.5 V
High battery voltage, switches on at 29 V, ± 0.5 V
Max. ripple on DC (battery) 5% RMS
Input current (nominal load) 200 A
No-load power consumption (ON mode) 660 mA - 16 W
No-load power consumption (energy saving mode) 300 mA - 7 W
Minimal DC fuse (slow blow) 250 A
Minimal cable size 70 mm²
Harmonic distortion typical < 1%
Cos phi all power factors allowed
Transfer system Masterswitch/Systemswitch can be connected to all sine wave inverters
Temperature range (ambient temp.) -25 °C to 80 °C, derating > 40 °C
-13 to 176 °F
Cooling natural/forced
Protection degree IP23
Protections over temperature, over load, short circuit, high battery, low battery
MasterBus compatible yes