Product Specifications

Specifications
General specifications
Output voltage 230/240 V - 50/60 Hz (selectable)
Output waveform true sine
Nominal battery voltage 12 V
Recommended battery capacity >= 270 Ah
Continuous power at 25 °C / 77 °F, cos phi 1 2500 W
Continuous power at 40 °C / 104 °F, cos phi 1 2500 W
Peak load (3 sec.) < 3000 W
Peak load (< 0.2 sec.) < 4000 W
AC connection hardwired + plug connection EU (Schuko) or with NZ/AU plug (code
28412500)
Efficiency 88 %
Parallel configuration yes, up to 15 units
3-Phase configuration yes, 3 units
Display/read-out LED indication: battery voltage, status
Alarms potential free alarm contact
Dimensions, hxwxd 283 x 436 x 128 mm
11.1 x 17.2 x 5.0 inch
Weight 8 kg
17.6 lb
Approvals CE, E-mark, RCM
Technical specifications
Technology high frequency, input & output fully isolated
Low battery voltage, switches off at 10.5 V
Low battery voltage, switches on at 12.5 V
High battery voltage, switches off at 16.5 V
High battery voltage, switches on at 14.5 V
Input current (nominal load) 250 A
No-load power consumption (ON mode) < 3.6 A
No-load power consumption (energy saving mode) < 1.1 A
Minimal DC fuse (slow blow) 300 A
Minimal cable size 95 mm²
Harmonic distortion typical < 5 %
Cos phi all power factors allowed
Transfer system integrated, automatic (inverter to grid: 8~10 ms, grid to inverter: 16~50
ms). Not for parallel & 3-phase operation (external transfer system
possible)
Temperature range (ambient temp.) -20 °C to 60 °C, derating power > 40 °C
-4 to 140 °F
Protection degree IP21, horizontal wall mounting
Protections over-temperature, overload, short circuit, high/low voltage, reverse
polarity (fuse)
Cooling temperature and load controlled fan
MasterBus compatible no