Product Overview

ManualsBrandsMatco-Norca ManualsPipe Repair Clamps2" x 9" Stainless Steel IPS Pipe Repair Patch Clamp

Table Of Contents

Slide Number 1

330 IPS Patch Clamp • Spec Sheet

FEATURES & BENEFITS

THE #330 PATCH CLAMP:

• Available for iron pipe size, copper tube size and actual outside

diameter size.

• No loose parts.

• Can be installed with one hand.

• Round corners with sheared edges turned down, eliminating the

danger of small cuts or nicks during installation.

• A long carriage bolt with extra large shoulder that prevents the

bolt from spinning during installation.

• A double chamfered oversized nut that allows easy hand

tightening.

• We have the finest packing in the industry utilizing die cut boxes

that are quadruple thick, eliminating all possibilities of damaging

clamps both un shipping and in your inventory.

AVAILABLE IN 3/8” – 24” DIAMETER

AVAILABLE IN 3”, 6”, 9” AND 12” WIDE

BAND: Stainless Steel - Type #304.

LUGS: Malleable Iron - Electro Galvanized with

Dichromate finish.

BOLTS: Carbon Steel - Electro Galvanized with

Dichromate finish.

NUTS: Carbon Steel - Electro Galvanized with

Dichromate finish .

WASHERS: SAE Flat Washer - Zinc II plated.

Meets specifications of ASTM-F844.

GASKET: Gridded Nitrile Buna Rubber is

especially resistant to aromatic hydrocarbons,

gasoline, petroleum oils, mineral oils, vegetable

oils and natural gas.

TEMPERATURE RATING: -20 degrees F to +180

degrees F.

PRESSURE RATING: 150 PSI

ADVANTAGES:

CLAMPS: Pre-formed at the factory. Drop in bolt eliminates loose parts

and allows for easy “one hand” installation.

STAINLESS STEEL BAND: Double slit so that edges on both sides of

clamp turn under. This eliminates sharp edges which would cut your

hand.

LUGS: Cadmium plated malleable iron to protect against rust and

corrosion.

BOLTS: Have an extra long square shank. Other bolts have a slightly

rounded shank that allows the bolt to turn.

NUTS: Oversized, allowing easy “one-hand” installation.

PACKAGING: Packed in a quadruple thick, fold-up box that prevents

damage.

SHIPPING: Clamps are shipped completely assembled.

MADE IN USA: For faster service, higher quality and the ability to react

to special customer needs.

Summary of content (1 pages)

PAGE 1
330 IPS Patch Clamp • Spec Sheet FEATURES & BENEFITS THE #330 PATCH CLAMP: • Available for iron pipe size, copper tube size and actual outside diameter size. • No loose parts. • Can be installed with one hand. • Round corners with sheared edges turned down, eliminating the danger of small cuts or nicks during installation. • A long carriage bolt with extra large shoulder that prevents the bolt from spinning during installation. • A double chamfered oversized nut that allows easy hand tightening.