Submittal Sheet

ManualsBrandsMatco-Norca ManualsCirculator Pumps12" Full Face Non Asbestos Ring Gasket

Table Of Contents

Bolt & Gasket Sets • Spec Sheet

Gasket: APG style CNA-750

• Constructed of aramid and other synthetic fibers and

bonded with nitrile rubber (NBR).

• Max temperature rating: 750 degrees F

• (Continuous temp max: 460 degrees F)

• Max pressure limit: 1595 PSI

• (Continuous pressure max: 725 PSI)

• Suitable for: Water, air, and a variety of industrial gases

and fluids; suitable for steam depending on operating

conditions

• Meets ASTM F152

• Comparable products: Klinger C-4401, Garlock 3000

Bolts: ASTM A307 Grade A zinc plated carbon steel

• Minimum tensile strength: 60,000 PSI

Nuts: ASTM A563 zinc plated carbon steel finished hex

nut

• (There is another class of nut designated as “heavy hex”

which is also used in industry. Our kits contain “finished

hex” which is consistent with many other bolt & gasket set

producers.)

Packaging:

• Box: Folding tab white mottled boxes

• Bolts are packaged in sealed poly bags

• Nuts are packaged in sealed poly bags

Non-Asbestos

Gasket: APG style 0700

• Constructed of SBR (Styrene Butadiene Rubber)

• “Smooth” red rubber finish as opposed to rough

“cloth” finish

• Max temperature rating: -20 to 170 degrees F, 210

degrees F intermittent

• Tensile Strength: 500 PSI

• Suitable for: hot & cold water, air, and neutral fluids

• Meets ASTM D-1330

Bolts: ASTM A307 Grade A zinc plated carbon steel

• Minimum tensile strength: 60,000 PSI

Nuts: ASTM A563 zinc plated carbon steel finished

hex nut

• (There is another class of nut designated as “heavy

hex” which is also used in industry. Our kits contain

“finished hex” which is consistent with many other bolt

& gasket set producers.)

Packaging:

• Box: Folding tab white mottled boxes

• Bolts are packaged in sealed poly bags

• Nuts are packaged in sealed poly bags

Red Rubber

Summary of content (3 pages)

PAGE 1
Bolt & Gasket Sets • Spec Sheet Non-Asbestos Red Rubber Gasket: APG style CNA-750 • Constructed of aramid and other synthetic fibers and bonded with nitrile rubber (NBR).
PAGE 2
Flange Compatibility Chart • Spec Sheet A.S.A Flanged Fittings Class 125 Cast Iron Flanges and Fittings Dimensions of Cast Iron Flanges, Bolts, and Ring Gaskets Nominal Pipe Size 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 14 OD 16 OD 18 OD 20 OD 24 OD 30 OD 36 OD 42 OD 48 OD *54 OD *60 OD *72 OD *84 OD *96 OD Diam. of Flange 4 1/4 4 5/8 5 6 7 7 1/2 8 1/2 9 10 11 13 1/2 16 19 21 23 1/2 25 27 1/2 32 38 3/4 46 53 59 1/2 66 1/4 73 86 1/2 99 3/4 113 1/4 Thickness¹ Diam.
PAGE 3
Flange Compatibility Chart • Spec Sheet A.S.A Flanged Fittings Class 300 Cast Iron Flanges Dimensions of Cast Iron Flanges, and Bolts Nominal Pipe Size 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 14 16 18 20 24 Diam. of Flange 3 3/4 4 5/8 4 7/8 6 1/8 6 1/2 7 1/2 8 1/4 10 11 12 1/2 15 17 1/2 20 1/2 23 25 1/2 28 30 1/2 36 Thickness of Flanges (Min.) 5/8 3/4 3/4 3/4 3/4 3/4 7/8 - Diam. of Bolt Circle 2.62 3.25 3.50 3.88 4.50 5.00 5.88 6.62 7.25 7.88 9.25 10.62 13.00 15.25 17.75 20.25 22.50 24.75 27.