Operation Instruction

Data Review & Sync
Step 1: Tap on “RUN DIAGNOSTICS” to launch
diagnostics (Take Maximus3.0 for example).
Step 6: Tap on “Sync” to start synchronizing(*Note: Please
make sure the dongle has already powered on for above 2
minutes before data synchronization).
Step 2: Tap on “Maxdrive” (*Note: It also can be accessed
from “Toolbox” -> “Applications” ->“Maxdrive”).
Step 5: Tap on “Sync”.
To update the Maxdrive firmware, tap on “Firmware Update” .
Step 7: After synchronization, the following screen will
appear. Tap on “CLEAR” to delete the recorded Maxdrive
data. Tap on “CANCEL” to go to Step 8.
Step 4: Tap on the desired dongle to connect (*Note:
Ensure that the tablet does not connect other Bluetooth devices).
Step 8: Tap on the desired segmented file to review the
recorded data (*Note: All data of driving segments is sorted in
date sequence) .
Step 3: Tap on “Search Bluetooth” to pair it with the
MaxDrive dongle (*Bluetooth ID starting with 98943).
Step 9: Tap on “Select All” to select all data stream items
or check the box to select certain item, and then tap on
“OK”.