Users Manual Part 1

8
MDMAXLITEA
3.5 Changing Language
MaxLiteA supports multiple languages. To change the
language of the tablet, please do the following:
1. On the home screen, tap
on Settings -> Language &
Input -> Languages.
2. Tap on “Add a language”
and choose the desired lan-
guage from the list.
3. Tap and hold the desired
language, drag it to the
top of the screen and
release. The system will
change to the chosen
language.
3.6 Wi-Fi Setup
MaxLiteA has built-in Wi-Fi that can be used to get online.
Once you’re online, you can register your tool, update
diagnostic software & APK and send email on your network.
Note: Once WLAN is set as ON, the tablet will consume
more power. While it keeps unused, please set it off to
save power. While WLAN is not in use, please turn it off to
conserve battery power.
Connect to a Wi-Fi Network
1. On the home screen, tap
on Settings > WLAN.
2. Move the Wi-Fi switch
to ON, the tablet starts
searching for available wire-
less LANs.
3. Select the desired Wi-Fi
network from the list. If
the chosen network is
open, you can connect
directly. A password
may be required for se-
cured networks.
Disconnect from a Wi-Fi Network
1. On the home screen, tap
on Settings > WLAN.
2. Tap on the network with
a “Connected” status,
then tap on “Forget”.