Users Manual Part 1

20
MDMAXLITEA
Google Search: Highlight the desired DTC, and tap on it to
search in the Google engine for more detailed information
about the selected DTC.
Report: Tap to save it as a report of the current data in text
format.
Fig. 5-17
While filling the report information (See Fig. 5-17),
• Tap on
to choose the right report type from the pull-
down list.
Note: Diagnostic report is classified into two categories:
Pre-Repair report and Post-Repair report.
To facilitate the comparison of the pre-repair and post-
repair reports and get accurate test result, please make
sure you saved the right type of the diagnostic report.
• In Technician Name field, input the technician name (*If
you have entered the technician name before, tap on
directly to select it from the pull-down list).
• Tap on “Symptom”, select the fault symptom information
from the list and tap on “OK” to confirm.
Fig. 5-18
• In Notes text box, write down more description about the
diagnostic trouble codes.
• To make the fault symptom more intuitive, you may also
tap on “Load Image” to take a photo or upload a local
photo.
After filling it, tap on “OK” to save it as a diagnostic report
and navigate to the report details page.
Workshop information