Users Manual Part 2

22
MDMAXLITEA
5.2.2.3 System Selection
This option allows you manually select the test system and
function step by step.
In Fig. 5-14, tap on “System Selection”, the screen displays as
follows:
Fig. 5-22
Swipe the screen from the bottom to view the vehicle
system on the next page.
Tap on the desired system (take “ECM” for example) to jump
to the test function page.
Note: Clearing DTCs does not fix the problem(s) that
caused the code(s) to be set. If proper repairs to correct the
problem that caused the code(s) to be set are not made,
the code(s) will appear again and the check engine light will
illuminate as soon as the problem that cause the DTC to
set manifests itself.
5.2.2.2 System Scan
Use this option to quickly scan and identify which systems
are installed on the vehicle.
In Fig. 5-14, tap on “System Scan” to scan the vehicle control
modules. When scanning is complete, the following screen
appears.
Fig. 5-21
Tap on the desired system to navigate to the test function
selection screen. For detailed operations on test function,
please refer to Chapter 5.3.2.3.