Users Manual Part 2

41
MDMAXLITEA
6 Toolbox
6.1 Saved Reports
Tap on “Saved Reports”, it mainly includes the following
options:
1). Health report
2). Recorded data
3). Data samples
4). Shared data samples
6.1.1 Health Report
This module stores all diagnostic reports generated in
process of vehicle diagnosis.
All the diagnostic reports are sorted by Date and Make. Tap
on the desired type to re-arrange and filter it.
• To select certain report, check the box before the report. To
select all reports, tap on “Select All”. To deselect all, tap on
“Unselect”.
• To revise the filename of the report, select the desired one
and tap on “Rename”.
• To share the report with others, select the desired one and
then tap on “Share”.
• Select the desired report and then tap on “Delete” to
delete it.
6.1.2 Recorded Data
If user records the running parameters or waveform graphs
while reading data stream, it will be saved as diagnostic
records and appear under this tab. You can use this option to
view recorded live data. Frame playback and auto playback
are supported.
Tap on “Recorded Data”, and select certain diagnostic record
and data stream items and tap on “OK” to jump to the
playback page.
Note: While viewing recorded live data, carefully look for
any irregularities in any of the PID values/signal information
(TEMP, RPM, etc). If any PIDs go beyond the standard range
value, or irregularities are detected, follow the procedures
in the vehicle’s service manual to perform additional
troubleshooting and repair.
Fig. 6-1
On-screen Buttons: