Users Manual Part 2

MDMAXLITEA

6.4.1 General

Fig. 6-3

6.4.1.1 Units of Measurement

It is designed to set the measurement unit. Metric System

and English System are available.

6.4.1.2 Expiration Reminder

All pre-installed diagnostic software is free to use for 30

days. Once it expires, it will be locked automatically and the

system will prompt you to activate your VCI if the expiration

reminder is ON.

6.4.1.3 Diagnostic Software Auto Update

This option is designed to turn on/off the automatic diagnostic

software update function. If set as ON, the system will

automatically update the available diagnostic software when

the tablet has a network connection and a newer version is

detected.

6.4.1.4 Automatic detection once connected

This option enables you to determine whether to start

an automatic VIN detection once the handset is properly

connected to the vehicle’s DLC.

6.4.1.5 Auto Generate Health Report once connected

Once it is set as ON, the system will automatically output

a health report once the AutoDetect diagnostic session is

ﬁnished.

6.4.1.6 Diagnostic Application Auto Update

This option is used to set whether to update the available

diagnostic application automatically when the tablet has

stable Wi-Fi signal.

6.4.2 VCI Management

Fig. 6-4

If the current VCI comes across communication failure, tap

on “Firmware Fix” to update and ﬁx the diagnostic ﬁrmware.