Users Manual Part 2

48
MDMAXLITEA
Appendix - FAQ
1. Communication error with vehicle ECU?
Please confirm:
1. Whether diagnostic cable is correctly connected.
2. Whether ignition switch is ON.
3. If all checks are normal, send vehicle year, make, model
and VIN number to us using “Feedback” feature.
2. Failed to enter into vehicle ECU system?
Please confirm:
1. Whether the vehicle is equipped with this system.
2. Whether the diagnostic cable is correctly connected.
3. Whether ignition switch is ON.
4. If all checks are normal, send vehicle year, make, model
and VIN number to us using “Feedback” feature.
3. Can I use any power adapter other than the included 5V to
charge the tablet?
No. Please use the included 5V power adapter to recharge
the tablet. We assume no responsibility for damage or loss
resulting from the use of any other adapters.
4. How to save power?
• Please turn off the screen while MaxLiteA keeps idle.
• Set a shorter standby time.
• Decrease the brightness of the screen.
• If Wi-Fi connection is not required, please turn it off.
• Disable GPS function if GPS service is not in use.
5. How to reset the tablet?
1. Ensure the tablet is in ON mode.
2. Select “Settings” on the home screen.
3. Select “Backup & reset”.
4. Tap on “Factory data reset”.
5. Tap on “RESET TABLET” to confirm.
6. After resetting is complete, follow the on-screen
instructions to finish the system settings.
WARNING: Resetting may cause data loss. Before doing so,
please make sure important data has been backed up.
6. How to update Android system?
Preparation
A newer Android version will be released to bring better user
experience. Please see below details. Please make sure your
tool battery has at least 70%.
Do NOT run any other programs during the update.