Users Manual Part 2

25
MDMAXLITEA
Fig. 5-25
On-screen Buttons:
Select Page: Tap on it to select all items of the current page.
To select certain data stream item, just check the box before
the item name.
Select All: Tap on it to select all items. To select certain data
stream item, just check the box before the item name.
Unselect: Tap on it to deselect all data stream items.
OK: Tap on it to confirm and jump to the next step.
After selecting the desired items, tap on “OK” to enter the
data stream reading page.
Fig. 5-26
Notes:
1. If the value of the data stream item is out of the range of
the standard (reference) value, the whole line will display
in red. If it complies with the reference value, it displays
in blue (normal mode).
2. The indicator 1/X shown on the bottom of the screen
stands for the current page/total page number. Swipe the
screen from the right/left to advance/return to the next/
previous page.
3. In the Unit column, tap on the desired measurement unit
tab to set it.
There are 3 types of display modes available for data viewing,
allowing you to view various types of parameters in the most
suitable way.
• Value – this is the default mode which displays the
parameters in texts and shows in list format.