Users Manual Part 2
26
MDMAXLITEA
• Graph – displays the parameters in waveform graphs.
• Combine – this option is mostly used in graph merge
status for data comparison. In this case, different items are
marked in different colors.
On-screen Buttons:
: Tap on it to view the waveform graph of the current data
stream item.
Fig. 5-27
• Min/Max: Tap on “Min/Max” to define the maximum/
minimum value. Once the value goes beyond the
specified value, the system will alarm.
• Customize: If desired, you can customize to show
only those PIDs you are interested in viewing. Tap on
“Customize” to add/change other data stream items.
Note: The real time (Live Data) vehicle operating information
(values/status) that the on-board computer supplies to
the tool for each sensor, actuator, switch, etc. is called
Parameter Identification Data (IPD).
Graph: Tap on it to view the waveform.
Fig. 5-28
• Combine: This option is mostly used in graph merge
status for data comparison.
Fig. 5-29