Users Manual Part 2

MDMAXLITEA

• Value: Tap to display the parameters in texts.

• Customize: This option allows you to select only the

PIDs that you wish to display. Tap on it, a pull-down list

of the data stream items appears on the screen. Select

(Up to 8 data stream items can be selected)/deselect

the desired items and then screen will display/remove

the corresponding waveforms immediately.

Fig. 5-30

Compare Sample: Tap on it to select the sample DS ﬁle, the

values you customized and saved in process of DS sampling

will be imported into the “Standard Range”(See below)

column for your comparison.

Note: Before executing this function, you have to sample

the values of data stream items and save it as an sample

DS ﬁle.

Fig. 5-31

Report: To save the current data as a diagnostic report. All

diagnostic reports can be accessed from “Toolbox” -> “Saved

Reports” -> “Health Report”.

Record: Tap to start recording diagnostic data. Recorded

live data can serve as valuable information to help you in

troubleshooting of vehicle problems. All diagnostic records

can be replayed from “Toolbox” -> “Saved reports” ->

“Recorded Data”.

Note: The saved ﬁle follows the naming rule: It begins with

vehicle type, and then the record starting time and ends

with .x431 (To differentiate between ﬁles, please conﬁgure

the accurate system time).

Save Sample: This item enables you to customize the

standard range of live data stream items and save it as DS

sample file. Each time you run the data stream items, you

can call out the corresponding sample data to overwrite the

current standard range.