Users Manual Part 2
29
MDMAXLITEA
5.3 Maintenance Reset
In addition to amazing & powerful diagnostic function,
MaxLiteA also features various service functions. The most
commonly performed service functions contain:
• Oil Reset Service
• Electronic Parking Brake Reset
• Steering Angle Calibration
• ABS Bleeding
• TPMS (Tire Pressure Monitor System) Reset
• IMMO Service
• Injector Coding
• Battery Maintenance System
• Diesel Particulate Filter (DPF) Regeneration
There are two methods to reset service lamp: Manual reset
or Auto reset. Auto reset follows the principle of sending
command from the tool to vehicle’s ECU to do resetting.
While using manual reset, users just follow the on-screen
instructions to select appropriate execution options, enter
correct data or values, and perform necessary actions, the
system will guide you through the complete performance for
various service operations.
Select “Reset”
Select the desired reset
item (e.g. oil lamp reset
etc.)
Select the car brand
Select the service mode
(The available mode varies
from vehicle to vehicle)
Follow the instructions
on the screen to operate
Figure 5-35
5.3.1 Oil Reset Service
This function allows you to perform reset for the engine
oil life system, which calculates an optimal oil life change
interval depending on the vehicle driving conditions and
climate.
This function can be performed in the following cases:
1. If the service lamp is on, you must provide service for the
car. After service, you need to reset the driving mileage
or driving time so that the service lamp turns off and the
system enables the new service cycle.
2. After changing engine oil or electric appliances that
monitor oil life, you need to reset the service lamp.