User's Guide

2-2
User Guide
7)
Close the Top cover.
Note: Ribbon carrier should be assembled without touching/damaging the printer head
Card Feeding
The input Hopper (automatic card feeder) can hold a maximum of one hundred 0.76 mm thick cards. A label
inside the door gives the instructions for correctly positioning and orienting the card.
When the single card manual feeder option is present, it can be used without needing to empty the input
Hopper.
The card path can be selected via software to speed card processing:
 Hopper

Reject bin.
The output Hopper at the front of the printer can hold a maximum of thirty 0.76 mm thick cards.
Input Hopper (Automatic Card Feeder)
1) Open Front door manually as shown below. Load the cards in the Hopper and then close the door.
Opening of front door manually