User's Guide

3-10
User Guide
Store the data just entered by clicking Apply Changes and then click Next.
The following screen is displayed:
Follow the instructions displayed:
 Power OFF the printer
 Disconnect the USB Cable

Connect the printer to the network using the LAN cable
 Power the printer back ON again.
Click Next upon completion. The following configuration software screen is displayed:
If the printer is not found, click Start to search for the network printer and wait until it is found.
Once found, the printer appears in the list of available printers with its related information (IP Address,
Printer name, Mac Address).
Click Next and wait for the configuration software to identify the printer and to display a message indicating
that installation was successful.