User's Guide

5-4
User Guide
7)
The counter indicates the number of cards that have been printed starting from the last cleaning
operation performed.
Click the Standard Cleaning button to start the cleaning procedure.
Once the cleaning procedure is completed, the card is ejected from the rear slot and the counter is
reset.
8)
Open the Top cover
9)
Insert the ribbon carrier.
10)
Close the Top covers.
11)
The Standard cleaning procedure is terminated and the printing counter is
reset to zero.
Card Path Advanced Cleaning
The card path advanced cleaning procedure is required after performing five Standard cleaning procedures:
 The special (alcohol impregnated) T-card must be used.
 The procedure involves cleaning the card path, removing the dust on the rollers and cleaning the
magnetic head.
 The printer has an internal counter that stores the number of Standard cleaning procedures performed,
so as to notify when the Advanced Cleaning procedure is required (see the Printer Manager
Specifications).
 A software-guided procedure will assist in carrying out the cleaning operations.
Advanced Cleaning Procedure
1) Open the printing module compartment covers. 2) Remove the ribbon carrier.
3) Close the printing module compartment 4) Insert the T-card into the rear slot of the printer.
covers.