User's Guide

5-6
User Guide
5)
Open the Printer Manager and click the Maintenance button. The Maintenance window is displayed.
6)
The counter indicates the number of cards that have been printed starting from the last cleaning
operation performed.
Click the Advanced Cleaning button to start the cleaning procedure.
Once the cleaning procedure is completed, the card is ejected from the rear slot and the counter is
reset.
7)
Open the printing module compartment covers.
8)
Insert the ribbon carrier.
9)
Close the printing module compartment covers
10)
The advanced cleaning procedure is now concluded, and the printing counter is reset to zero.
Cleaning Roller Advanced Cleaning
It is suggested to perform an advanced cleaning of the cleaning roller when the standard cleaning
procedure does not efficiently remove all the dust from the cleaning roller.
Roller Cleaning Procedure
1)
Unplug the printer from the power supply.
2)
Open the Top cover
3)
Remove the ribbon carrier.
4)
Press with 2 fingers gently to remove Cleaning roller assembly as illustrated below.
5)
Identify the roller & gently Clean the roller with water only.
6)
After cleaning dry the roller thoroughly.