User's Guide

User Guide
6-1
Encoding Options
Chip Encoding
The Chip Encoder is an optional module that allows the encoding of chip cards (smart cards).
Available chip encoding modules and related functionalities:
 CHIP ENCODING STATION COMBO PCTWIN + OMNIKEY
Allows you to run chip encoding on contact cards (via Chip PCTwin) and on cards with
out contacts (via Chip Omnikey) Code PR000015
 CHIP ENCODING STATION CONTACT PCTWIN
Allows you to run chip encoding on contactless cards only (via Chip PCTwin) Code PR000024
 CHIP ENCODING STATION CONTACT OMNIKEY
Allows you to run chip encoding on contact cards only (via Chip Omnikey) Code PR000025
 CHIP ENCODING STATION CONTACTLESS OMNIKEY
Allows you to run only on chip encoding contactless cards (via Chip Omnikey) Code PR000026
 CONTACT STATION AND EXTERNAL ENCODER CONNECTION
Allows you to run chip encoding using an encoding system off the printer Code PR000020
 CONTACT STATION FOR CHIP ENCODING
Allows you to run chip encoding with user - selected.
Encoder boards other than those proposed by Matica Code PR000223
Install the module according to the instructions contained in the package.
Encoding Test
Warning: Before proceeding with the configuration of the module make sure the printer is turned on and
connected to your computer via USB.
Warning: before proceeding with encoding operations, download the driver compatible with the O.S: used
in the PC from the site of the encoder board manufacturer.