User's Guide

Test
Open Printer Manager and click the Encoding button. The following screen is displayed from where it is
possible obtain the Smart Card ATR number.
Reading the Chip Encoding
This area provides the ATR number of the contact card. This operation is performed to ensure that the
contact encoder is working correctly.
Selecting the Encoder option from the drop-down list, choose the type of encoder you require. If only one
encoder is available, this option is not active.
1) Load Button
Click to start a batch job, consisting of:
a)
Taking the card from the selected or default input (see card path in the printer driver Card tab)
b) Moving the card to the contact encoder.
2) Read ATR Button
Click to read the contact card’s ATR number.
For the ATR Number to be read, the card must be positioned in the contact encoder by clicking Load.
The encoder then reads the card and displays the ATR number in the window. The encoder reads and displays
the ATR number until clicking the Eject button, at which point the card is moved from the encoder to the output
specified for the card path (see card path in the printer driver Card tab).
3) Eject Button
Click to move the card that has been left inside the printer to the selected or default output. (see card path in
the printer driver Card tab).