User's Guide

ISO3 DEFAULT
Tracks (JIS-2 Standard): If the JIS-2 standard is chosen, only the track 1 appears and in the drop-down
menu.
Standard Track 1
JIS-2 DEFAULT
4)
Mag strip start/end sentinels: with these commands it is possible to set the “Special Character Strings”
used for the in-line magnetic encoding. These special characters are placed at the beginning and end of
the characters that we want to write in the magnetic fields, for more details please refer to the rule ISO7811.
Every Start and end sentinel must have the possibility to manage until of 3 characters each. In the drop -
down menu there are two type of choices:
 Default: the strip start/end sentinels Characters are the Standard DCP and they are not editable.
 Personalized: the strip start/end sentinels Characters are editable by the user.
In the "begin" and "end" boxes is possible display or set the specials characters. Every row corresponds
to a track. For each track, you can use up to a maximum of three characters, always followed by the track
number as follows:
track 1: start= -%1 end=?
track 2: start= -%2 end=?
track 3: start= -%3 end=?
6-4 User Guide