Users Manual Part 1

Full Color Card Printer
4
Part Names and Descriptions
Front Side of the Printer
*1 When using CR-80 cards (size: 3.375" × 2.125" (86 mm × 54 mm), thickness: 0.03" (0.76 mm)).
a Top C over
Open when loading cards or cleaning the
feeding roller.
b Operation Panel
Includes the keys, the LCD Panel, and LED
indicator for operating the printer.
→See "Operation Panel" on page 8 for detailed
Oper
ation Panel part names and descriptions.
c Front Cover
Open when changing ink ribbons and transfer
film, and when cleaning the Cleaning Roller.
→See "Front Cover" on page 7 for information about
th
e names of parts inside the cover a
nd their
d
escriptions.
→See "Changing the Ink Ribbon and Transfer Film" on
page 16 for details about changing the Ink Ribbon
Ca
rtridge.
→See "Cleaning" on page 56 for instr
uctions on
cleaning the Cleaning Rolle
r.
d Open Cover Switch
Front cover opening switch. Press to open the
Front Cover.
e Power Switch
Turns the power on and off.
→See "Turning On and Off the Printer" on page 9 for
instr
uctions on turning the power on and off.
f Card Stacker
A maximum of 250 cards
*1
can be stacked by
attaching the Card Ejection Slot (Left). Without
good reason, there is no need to remove the
Card Stacker.
→See the "Easy Setup Guide" for instructions on
attaching.
g Card Ejection Slot (Left)
Ejects correctly printed cards and cards with
errors. You can select between Card Ejection
Slot (Left) and (Right) for card ejection.
The factory default is set so both correctly
printed cards are output from Card Ejection Slot
(Left).
→See "Switching the Card Ejection Slot" on page 48
f
or information about switching the card ejection slot.
a
g
f
b
de
c
Operating Manual MC660
Matica Technologies