Users Manual Part 1

Basic Card Printing Methods

This section explains the basic flow of operations, from turning on the power through

printing a card.

Turning On and Off the Printer

Turn on the printer before starting to print.

Before turning on the power, make sure the following preparations are complete:

• The Ink Ribbon Cartridge is loaded

• The Transfer Film is loaded

• The Front Cover is closed

• The Top Cover is closed

• The printer is connected to the computer

• The printer driver is installed

 If the preparations above have not been performed, follow the instructions in

the "Easy Setup Guide".

1 Press the Power Switch to turn on the

wer.

• Press "–" on the Power Switch behind of the printer for

turning on the power.

• After [Initializing..] appears on the LCD Panel, the

operating indicator turns blue and [Ready to Print]

pears.

• Press "O" on the Power Switch for turning

off the

power.

Note

 If a card is in the printer when the power is turned on, it is ejected from Card Ejection

Slot (Left) (default setting).

 If the LED Indicator turns orange/blinks, refer to "Troubleshooting" on

page 69.

Ready to Print

Operating Manual MC660

Matica Technologies