Users Manual Part 1
15
5 Click [Print].
• Printing starts.
• Cards are pulled into the printer and the LED Indicator
blinks blue.
[Now Printing] appears on the LCD Panel.
• If the cards are not loaded, [Card Empty] appears on
the LCD Panel.
Removing Cards
The factory default is for printed cards to be ejected from Card Ejection Slot (Left).
1 Removing cards from the Card Stacker.
• You can remove loaded cards from the slit on the side
of the Card Stacker (see diagram at right).
Note
z The Card Ejection Slot (Left) Card Stacker has a maximum capacity of approximately
250 cards.
When ejecting cards from the Card Ejection Slot (Left), empty the Card Stacker when
it has approximately 250 cards.
z The factory default is set so that correctly printed cards are output from the Card
Ejection Slot (Left), and cards with errors are output from Card Ejection Slot (Right).
→See "Switching the Card Ejection Slot" on page 48 for information about switching the card ejection
location.
→See the "Easy Setup Guide" for instructions on removing the Card Stacker.
z The factory default status is to have the front face facing down for single-sided
printing, and facing up for double-sided printing.
→See "Set the Orientation of Cards to Eject" on page 51 for the orientation of cards to eject.
Operating Manual MC660
Matica Technologies
Maca MC660