Users Manual Part 1

17
 Changing the Ink Ribbon
Use the following procedure when replacing the Ink Ribbon.
1 Remove the Ink Ribbon Cassette.
• Pull out the handle of the ink ribbon cassette with the
ha
ndle turned up
.
Note
 When placing the Ink Ribbon Cassette
down, prevent contamination adhering by
placing it with the handle on the bottom.
2 Remove the Ink Ribbon from the
Casse
tte.
• First, remove the spool spindle from the winding side
(b
lack) holder, then remove
the spool spindle from the
f
eed side (magenta) holder
.
• When removing the spool spindle, pressing the spool
spindle
downwards and tilting it to the side mak
es it
ea
sy to remove
.
3 Load new Ink Ribbon in the Cassette.
• Insert the spool spindle into the feed side (magenta)
ho
lder. As in the diagram at right, unwind and
load
on
to the shaft. Finally, insert the spool spindle into the
winding side holder.
•
When inserting the spool spindle, first inserting th
e
bo
ttom, then standing the spool spindle mak
es it easy
to insert.
•
When setting the used Ink Ribbon, take up used par
ts
of
the ribbon to the spool spindle f
or the winding side
(black). Otherwise, images may not be printed on a
card correctly.
a
b
Winding Side
Feed Side
Operating Manual MC660
Matica Technologies