Users Manual Part 1

Full Color Card Printer
20
4 Load new Transfer Film in the Cassette.
• Insert the spool spindle into the feed side (white)
ho
lder. As in the diagram at right, unwind and
load
on
to the shaft. Finally, insert the spool spindle into the
winding side holder.
•
When inserting the spool spindle, first inserting th
e
bo
ttom, then standing the spool spindle mak
es it easy
to insert.
•
When setting the used Transfer Film, take up un
used
pa
rts of the film to the spool spindle for the f
eed side
(white). Otherwise, images may not be transferred to a
card correctly.
5 Attach the pin on top of the Transfer
Film Cassette.
• Tightly fit the tip of the pin into the grooves.
Note
 Make sure that the Transfer Film is running
between the two pins on top of the Transfer
Film Cassette.
6 Take up the Transfer Film slack.
• Turn the knob as in the diagram at right, and take up
th
e film slac
k.
•
If the slack is not taken up properly, then the Transf
er
Film may jam.
Operating Manual MC660
Matica Technologies