Users Manual Part 1

Full Color Card Printer
32
Reduce Printer Power Consumption
Select the power-saving mode for when the printer is not being used.
Additionally, you can set a time to switch to heater stop state.
Note
 You can also change the settings by using the printer driver (→ See "Opening the
Printer Driver Settings Screen" on page 89).
1 Switch from Normal Mode to User
Mode
.
→See "Switching to User Mode" on page 24 for details on
ho
w to switch to User Mode.
2 Press the  Key until [Printer Setup] is
dis
played, then press the SET Key.
3 Press the  Key until [Power Save
Mode] is displayed, then press the SET
Key.
4 Change the settings by using the /
Keys, then press the SET Key.
• Pressing the / Keys switches between [HEATER
OFF
] ⇔ [MAIN POWER OFF].
• Settings values are as below.
Ready to Print Ready to Print
Printer Info.
SET:>>
Printer Info.
SET:>>
MENU
Normal Mode User Mode
Printer Info.
SET:>>
Printer Info.
SET:>>
Printer Setup
SET:>>
Printer Setup
SET:>>
Buzzer
B
u
z
z
e
r
Buzzer Buzzer
SET
Power Save Mode
MAIN POWER OFF
Buzzer Buzzer
SET
Power Save Mode
MAIN POWER OFF
Power Save Mode
MAIN POWER OFF
Power Save Mode
HEATER OFF
Settings Value Details
HEATER OFF If the printer is on standby for a preset time, the heater will turn off.
MAIN POWER OFF If the printer is on standby for a preset time, the heater will turn off.
Additionally, if the printer is in standby for one hour, the printer will turn
off.
Operating Manual MC660
Matica Technologies