Users Manual Part 1

33
5 Press the  Key until [Power Save
Time] is displayed, then press the SET
Key.
6 Change the settings by using the /
Keys, then press the SET Key.
• Figures show the duration (minute) for which the
pr
inter will turn to become he
ater stop state from
standb
y mode.
• You can set the duration from 5-60 minutes to make
th
e printer enter into heater stop state from standb
y
mo
de.
• Use the / Keys to change the value, and press the
SET Key to fix the changes.
• If the MENU Key is pressed prior to pressing
the SET
Key to fix the changes, then the changes will be
canceled.
•
It will display [Ready to Print / Heater Power Off]
when
the printer enters into heater stop state.
Note
 The factory default setting is [MAIN POWER OFF].
Additionally, [Power Save Time] is set at [20](20 minutes).
 If the printer is off ([MAIN POWER OFF]), turn it on by pressing the Power Switch to
use it (→See "Turning On and Off the Printer" on page 9).
 When temperature control of the heater stops, it will resume if you receive print data
or press the SET Key.
Adjusting the Print Results
You can adjust the print results by changing the hue and the strength of the edge.
Note
 You can also change the settings by using the printer driver (→See "Opening the
Printer Driver Settings Screen" on page 89).
 Adjusting the printing position
You can adjust the printing position (vertical/horizontal) of the image and black text that will
be printed on the card.
Power Save Mode
Power Save Time
SET
Power Save Time
20
20
Power Save Time
Power Save Time
20
5
Power Save Time
60
Operating Manual MC660
Matica Technologies