Users Manual Part 1

Full Color Card Printer
34
1 Switch from Normal Mode to User
Mode
.
→See "Switching to User Mode" on page 24 for details on
ho
w to switch to User Mode.
2 Press the  Key until [Printer Setup] is
dis
played, then press the SET Key.
3 Press the  Key until [Print Vertical] or
[Print Horizon
tal] is displayed, then
press the SET key.
• Adjust the vertical printing position using the [Print
V
ertical] menu and adjust the horizontal printing
position using [Print Horizontal].
4 Change the settings by using the /
Keys, then press the SET key.
• If you increase the setting value of [Print Vertical] , the
pr
inting position will move downwards. (Setting va
lues
are b
y increments/decrements of appro
ximately
0.04 mm)
• If you increase the setting value of [Print Horiz
ontal] ,
th
e printing position will move to the right. (Setting
values are by increments/decrements of
ap
proximately 0.1 mm)
Note
 The optimum value is set for each unit as factory default.
Ready to Print Ready to Print
Printer Info.
SET:>>
Printer Info.
SET:>>
MENU
Normal Mode User Mode
Printer Info.
SET:>>
Printer Info.
SET:>>
Printer Setup
SET:>>
Printer Setup
SET:>>
Buzzer
B
u
z
z
e
r
Buzzer Buzzer
SET
Print Vertical
Buzzer
SET
Print Vertical
0
Print Horizontal
SET
Print Horizontal
0
Print Horizontal
0
0
Print Vertical
0
Print Vertical
Print Vertical
22
-22
-
-
+
+
[Print Vertical]
Printing
Card
[Print Horizontal]
Operating Manual MC660
Matica Technologies