Users Manual Part 1

35
 Adjusting the contour level
You can adjust the sharpness of edges such as facial contour.
1 Switch from Normal Mode to User
Mode
.
→See "Switching to User Mode" on page 24 for details on
ho
w to switch to User Mode.
2 Press the  Key until [Image Setup] is
dis
played, then press the SET Key.
3 Confirm that [Sharpness] appears, and
press
the SET Key.
4 Change the settings by using the /
Keys, then press the SET Key.
• If you increase the setting value, contours will be more
pronounced. If you increase the setting value to
o
m
uch, the image quality may appear grainy.
Ready to Print Ready to Print
Printer Info.
SET:>>
Printer Info.
SET:>>
MENU
Normal Mode User Mode
Image Setup
SET:>>
Sharpness
SET
Printer Info.
SET:>>
SET
Sharpness
0
Sharpness
0
Sharpness
0
Sharpness
Sharpness
2
-2
Operating Manual MC660
Matica Technologies