Users Manual Part 1

37
 Adjusting the color shift (vertical) of an image
You can adjust the color shift (vertical) of a color image.
1 Switch from Normal Mode to User
Mode
.
→See "Switching to User Mode" on page 24 for details on
ho
w to switch to User Mode.
2 Press the  Key until [Image Setup] is
dis
played, then press the SET key.
3 Press the  key until [Test Print(PatU)]
is d
isplayed, then press the SET Key.
• The pattern for color shift adjustment is printed.
(F
eed one piece of card from the Card Case. The
card is ejected from the Card Ejection Slot (Left) after
the pattern for adjustment is printed.)
4 Press the  Key until [Color Shift Vtc]
is d
isplayed, then press the SET Key.
5 Change the settings by using the /
Keys, then press the SET Key.
• Set to the value printed beside the line that have the
least amount of color shift (clearly visibl
e) from the
pa
ttern printed out in Step 3.
Note
 Use a test print card since a used card cannot be reused.
Ready to Print Ready to Print
Printer Info.
SET:>>
Printer Info.
SET:>>
MENU
Normal Mode User Mode
Image Setup
SET:>>
Sharpness
SET
Printer Info.
SET:>>
Sharpness
SET
Test Print(PatU)
SET:Start
Test Print(PatU)
SET:Start
Color Shift Vtc
Test Print(PatU)
SET
0
0
Color Shift Vtc
0
Color Shift Vtc
0
Color Shift Vtc
Color Shift Vtc
8
-8
-6
-4
-2
-0
+2
Set the value of the line
most clearly visible.
(The diagram shows a
value of "-3")
Operating Manual MC660
Matica Technologies