Users Manual Part 1

39
 Adjusting the color shift of an image (horizontal)
You can adjust the color shift (horizontal) of a color image.
1 Issue 1 card with the design that you want to adjust.
• Please print a sample card from the application you are using.
• Processing with a magnet or IC card is not required. Please select only printing the card surface.
• Please consult with the sales agent regarding how to use the application.
2 Switch from Normal Mode to User
Mode.
→See "Switching to User Mode" on page 24 for details on
how to switch to User Mode.
3 Press the  key until [Image Setup] is
displayed, and then press the SET key.
4 Press the  key until [Test Print(User)]
is displayed, and then press the SET
key.
• A card will be issued with a composite of the
procedure 1 design and the color bleed confirmation
pattern (5 places).
5 Press the  key until [Y Shift Hrz-F] is
displayed, and then press the SET key.
Ready to Print Ready to Print
Printer Info.
SET:>>
Printer Info.
SET:>>
MENU
Normal Mode User Mode
Image Setup
SET:>>
Sharpness
SET
Printer Info.
SET:>>
Sharpness
SET
Test Print(User)
SET:Start
Test Print(User)
SET:Start
Y Shift Hrz-F
Test Print(User)
SET
0
0
Y Shift Hrz-F
0
Operating Manual MC660
Matica Technologies