Users Manual Part 1

Full Color Card Printer
42
4 Change the settings by using the /
Keys, then press the SET Key.
Note
 If the Ink Ribbon type set in the printer and the [Ribbon Type] setting are different, an
Ink Ribbon error or a transfer problem occurs.
→See "Ribbon Type" and "Ribbon Wind up" in "How to Clear an Error" on page 69.
→See "General Print Problems (In correct Colors, etc.)" in "When Cards are Not Printed Correctly..." on
page
80 about signs of transfer problems.
 If the set Transfer Film type and the [Film Type] setting on the printer are different, a
transfer error occurs since the transfer condition is not appropriate.
→See "The card is bent" and "Print flakes off" in "When Cards are Not Printed Correctly..." on page 80
abou
t signs of transfer problems.
Ribbon Type
OOOOO
Ribbon Type
xxxxx
Operating Manual MC660
Matica Technologies