Users Manual Part 2

Full Color Card Printer
62
Cleaning the Transport Roller
If the printing location on printed cards is out of adjustment, or there is white space at the edge
of printed areas, then clean the secondary transfer section Transport Roller at the bottom of the
Top Access Cover.
 Be sure to turn off the printer before cleaning the rollers.
 Read the cautions in "Before Cleaning" on page 56.
1 Turn off the power.
2 Open the top cover, and remove the
Card Case.
• Hold the Card Case handle, and remove.
3 Open the Front Cover and Top Access
Cover.
• Press the open over switch, and pull the Front Cover
f
orw
ard.
•
Hold the handle of the Top Access Cov
er and lift to
open.
•
If you do not open the Front Cover, then y
ou cannot
op
en the Top Access Cover
.
4 Lift the decurl section.
• First release the lock on the decurl section as at right
be
fore lift
ing.
Decurl Section
Operating Manual MC660
Matica Technologies