Users Manual Part 2

Full Color Card Printer

Cleaning the Reverse Roller

If card delivery from the reverse section to the secondary transfer section Transport Roller is not

possible, then clean the Reverse Roller.

 Be sure to turn off the printer before cleaning the rollers.

 Read the cautions in "Before Cleaning" on page 56.

1 Turn off the power.

2 Open the top cover, and remove the

Card Case.

• Hold the Card Case handle, and remove.

3 Open the Front Cover and Top Access

Cover.

• Press the open over switch, and pull the Front Cover

orw

ard.

•

Hold the handle of the Top Access Cov

er and lift to

open.

•

If you do not open the Front Cover, then y

ou cannot

en the Top Access Cover

4 Rotate the reverse knob, and locate the

verse section roller as in the diagram.

• When checking inside the reverse section, remove the

leaning Roller and Cleaning Tape Cassette

→See "C

leaning Tape Replacement" on page 22 an

"Cleaning the Cleaning Roller" on page 59 for

instr

uctions on removing

the Cleaning Roller and

leaning Tape Cassette.

Reverse

Knob

Reverse Section

Reverse Feeding

Knob

Operating Manual MC660

Matica Technologies