Users Manual Part 2

75
When a Card is Jammed...
Use the following procedure to remove cards jammed during printing or when the jammed card
is unable to be removed despite the SET Key being pressed. Ejection Dials are at 3 locations
within the printer.
 Cards being printed are fed through this printer using the following path.
If cards are not correctly output, then there may be a jam in any of the
following locations.
1 (If cards are jammed within the Card
Case)
Remove cards from the Card
Case.
• If the furthest-right card is partially fed into the
ma
chine, slowly pull it out by hand.
• If the jam is cleared, then go
to Step 8.
2 Remove the Card Case.
• Close the Card Case cover, hold the handle, and
remo
ve.
a
c
b
a Reverse Feeding Knob
b Reverse Knob
c Feeding Knob
Card Case
Cleaning Section
Card Ejection
Slot (Left)
Card Ejection Slot
(Lower Right)
Reverse
Section
Primary Transfer
Section
Secondary Transfer Section
Operating Manual MC660
Matica Technologies