Users Manual Part 2

b Rotate the reverse knob so that the

edge of the cards is at the upper left,

and rotate the reverse feeding knob

so that this outputs as in the figure

at right.

• Jammed cards will be output from the top of the

inter, so remove these by h

and.

•

If the jam is cleared, then go

to Step 8.

7 (If the card is in other than the reverse

sec

tion)

Rotate the feeding knob.

• Jammed cards are ejected from Card Ejection Slot

eft).

• If the jam is cleared, then go

to Step 8.

• Do not turn the card feeding knob, reverse feeding

knob or reverse knob without checking the condition of

the card inside the printer

There is a danger of parts breakage and card loss.

the card is lost, please contact your reseller

8 Close the Top Access Cover and Front

ver.

• Before closing the cover, return the Card Case, decurl

section

, Cleaning Roller, and Cleaning T

ape Cassette

their original positions

9 Press the SET Key.

• The error message on the LCD Panel disappears, and

the printer returns to Normal Mode

Secondary Transfer Section

Feeding

Knob

Operating Manual MC660

Matica Technologies