Users Manual Part 2

Full Color Card Printer
78
If the Ink Ribbon or Transfer Film are Cut
If the Ink Ribbon or Transfer Film are cut for any reason, then repair these using the method
below.
1 Remove the Ink Ribbon Cassette or
T
ransfer Film Cassette.
→See "Changing the Ink Ribbon and Transfer Film" on
page 16 for details on how to remove the Ink Ribb
on
C
assette and Transfer Film Cassette.
2 Carefully trim the cut section with
sci
ssors.
3 Use cellophane tape to join the ribbon
or film.
• Place the cut area in the middle.
•
Join the cut surfaces so that they are aligned properly
.
•
Do not discard the used ink or film on the winding side.
a
b
Cellophane Tape
Operating Manual MC660
Matica Technologies